MaxiDry® Zero™

Seamless Knit ATG Nylon Glove with Thermal Lining and Double-Dipped Nitrile MicroFoam Grip on Full Hand

56-451

4232

EN 388 2016 Results: 4232X
Abrasion: 4
Cut (Coupe Test): 2
Tear: 3
Puncture: 2
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

021

Protective Gloves Against Cold: 021
Convective Cold Resistance - 0
Contact Cold Resistance - 2
Water Permeability - 1

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Available Colors:

Purple
  • SIZES: S-XXL
  • Packed: 72 Pair/Case
  • Country of Origin: Sri Lanka
Product Attributes

Liner Material: Nylon / Elastane

Nylon: Seamless nylon liner offers increased comfort, finger dexterity and breathability.
Elastane: Adds comfort and breathability.

View All NylonView All Elastane

Construction: Coated Seamless Knit

Coated Seamless Knit:

View All Coated Seamless Knit

Gauge: 15

Gauge: The number of rows of stitches per inch. A higher gauge means less bulk and greater dexterity.

View All 15 Gauge
Product Description

Product Description

The MaxiDry® Zero™ integrates the core values of the MaxiDry® brand to bring comfort and liquid repellence together and combine them with our THERMtech® technology platform. This technology offers thermal resistance up to -10°C/14°F inside the glove under high activity with a coating designed to remain flexible for temperature up to -30°C / -22°F.

Features

  • Seamless construction offers increased comfort and breathability
  • MicroFoam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Liquid Repellence - Keep moisture away from your skin to ensure your hand remains warm. This technology also works to avoid wind chill for those working outdoors
  • High Thermal Insulation Properties - Without sacrificing flexibility, dexterity, weight and comfort
  • Super Soft and Super Flexible Coating - Providing ultimate flexibility even in extremely cold environments
  • Optimized Grip - delivered though the ultra soft coating to ensure maximum flex and contact with the things you handle
  • Connected With Care - Insulation liner is bonded away from the flex and movement points of your hands i.e. knuckles, to ensure ultimate comfort
  • All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation
  • This glove has been laundered prior to final packaging making it clean and safe for use
  • The Oeko-Tex® Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin
  • The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product
  • Silicone free
  • Complies with FDA food handling requirements 21 CFR, Part 177
  • Seamless Knit Glove
  • 15G Nylon Shell
  • Thermal Liner
  • Double Dip
  • Full Nitrile w/ Nitrile MicroFoam Grip
  • Complies w/ FDA 21 CFR
  • Knit Wrist
Standards Met

EN 388 2016 Results: 4232X

Abrasion: 4 Cut (Coupe Test): 2 Tear: 3 Puncture: 2 Cut (TDM-100 Test): Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Cold: 021

en-511

Convective Cold Resistance - 0
Contact Cold Resistance - 2
Water Permeability - 1

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Focused on innovation and quality, ATG® designs, develops and manufactures gloves that enhance the performance of the most sophisticated work tool, the hand. Their customers say that ATG® stands for value for money, quality, innovation, enthusiasm and a sense of competitive challenge. They deliver quality products and services through a core team that tracks markets, observes products in use and discusses with end-users, which forms the basis to continually improve the customer's experience through innovation.

View Products
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL