Protect Your Hands

PIP offers the widest range of Seamless Cut-Resistant gloves and sleeves anywhere in the world. Cut-Resistant products are extensively used in industrial, construction and food processing markets. The use of Cut-Resistant gloves and sleeves has increased considerably over the years as we've led with the introductions of new yarns and grips.

SHOWING 1-34 OF 34 ITEMS
1 of 1
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove - Light Weight

07-K200

  • 100% Kevlar
  • 13 Gauge
  • Light Weight
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove - Heavy Weight

07-K350

  • 100% Kevlar
  • 7 Gauge
  • Heavy Weight
  • SIZES: XS-XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar Gloves with PVC Grips

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove with PVC Dot Grip - Light Weight

08-K200PD

  • 100% Kevlar
  • 13 Gauge
  • Light Weight
  • EN Cut Level 3
  • Dots One Side
  • SIZES: S-XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
NeoFoam Coating

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

09-K1218

  • Engineered Kevlar Yarn
  • Gray Shell
  • 18 Gauge High Dexterity
  • NeoFoam Coated Grip
  • Touchscreen Compatible
  • Silicone Free
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X31C

EN 388 2016 Results: 4X31CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Contact Heat Level: 2

Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

en-407
Protective Gloves Against Thermal Hazards: X1XXXX

Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Kevlar with Polyurethane Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® / Elastane Glove with Polyurethane Coated Flat Grip on Palm & Fingers

09-K1250

  • Kevlar/Elastane Seamless Knit
  • Yellow 15 Ga Shell
  • Gray Polyurethane Coated Smooth Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: XS-2XL
  • PACKED: 12 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4231B

EN 388 2016 Results: 4231BX

Abrasion: 4
Cut (Coupe Test): 2
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI PUNCTURE LEVEL: 2

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar with Crinkle Finish Latex

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Latex Coated Crinkle Grip on Palm & Fingers

09-K1300

  • 100% Kevlar
  • Premium Grade
  • 7 Gauge
  • Medium Weight
  • ANSI A4 EN 5
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3544D

EN 388 2016 Results: 3544DX

Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar with Crinkle Finish Latex

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Latex Coated Crinkle Grip on Palm & Fingers

09-K1310

  • 100% Kevlar
  • Superior Grade
  • 10 Gauge
  • Medium Weight
  • ANSI A3 EN 4
  • SIZES: S-XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2444C

EN 388 2016 Results: 2444CX

Abrasion: 2
Cut (Coupe Test): 4
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar with Solid Nitrile Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Nitrile Coated Smooth Grip on Palm & Fingers - Medium Weight, DISCONTINUED

09-K1400

  • 100% Kevlar
  • Solid Nitrile
  • Smooth Grip
  • 10 Gauge
  • Medium Weight
  • EN Cut Level 3
  • SIZES: XS-XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2342B

EN 388 2016 Results: 2342BX

Abrasion: 2
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar with MicroFinish Latex Grip

PowerGrab™ KEV4

Seamless Knit DuPont™ Kevlar® Glove with Latex Coated MicroFinish Grip on Palm & Fingers

09-K1444

  • Powergrab Kevlar
  • 100% Kevlar
  • MicroFinish
  • Latex Grip
  • 10 Gauge
  • Medium Weight
  • Sanitized
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X43D

EN 388 2016 Results: 3X43D

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

en-407
Protective Gloves Against Thermal Hazards: X2XXXX

Resistance to Flammability - X
Contact Heat Resistance - 2
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar with Solid Nitrile Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® / Elastane Glove with Nitrile Coated Smooth Grip on Palm & Fingertips - Medium Weight

09-K1450

  • Kevlar and Elastane Blend Shell
  • 15 Gauge
  • Medium Weight
  • Flat Nitrile Coated Smooth Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 12 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3221B

EN 388 2016 Results: 3221BX

Abrasion: 3
Cut (Coupe Test): 2
Tear: 2
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI PUNCTURE LEVEL: 3

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar with Solid Nitrile Grip BEST SELLER

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

09-K1600

  • Engineered Kevlar Yarn
  • Yellow/Black Bumblebee Shell
  • 13 Gauge
  • Black Nitrile Foam Coated Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: S-3XL
  • PACKED: 6 Dozen/Case
ansi-A7
ANSI Cut Level: A7

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X32F

EN 388 2016 Results: 4X32FX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI PUNCTURE LEVEL: 2

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ANSI Contact Heat Level: 2

Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar with Solid Nitrile Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

09-K1618

  • Engineered Kevlar Yarn
  • Gray Shell
  • 18 Gauge High Dexterity
  • Black Nitrile Foam Coated Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4421C

EN 388 2016 Results: 4421CX

Abrasion: 4
Cut (Coupe Test): 4
Tear: 2
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Contact Heat Level: 2

Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar with Solid Nitrile Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

09-K1630

  • Engineered Kevlar Yarn
  • Gray Shell
  • 13 Gauge
  • Black Nitrile Foam Coated Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X31D

EN 388 2016 Results: 4X31DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI PUNCTURE LEVEL: 2

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ANSI Contact Heat Level: 2

Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare

G-Tek® KEV™

Hi-Vis Seamless Knit DuPont™ Kevlar® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

09-K1640

  • Engineered Kevlar Yarn
  • Nitrile Foam Coated Grip
  • Palm & Fingertips
  • SIZES: M-XL
  • PACKED: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X31D

EN 388 2016 Results: 4X31DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Compare
Kevlar with MicroFinish Nitrile Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers - Medium Weight

09-K1660

  • Seamless Knit Kevlar Shell
  • 13 Gauge Yellow
  • Black Double Dipped Nitrile with MicroSurface Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4343B

EN 388 2016 Results: 4343BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar with MicroFinish Latex Grip

PowerGrab™ Katana

Seamless Knit DuPont™ Kevlar® / Steel Glove with Latex Coated MicroFinish Grip on Palm & Fingers

09-K1700

  • Seamless Knit Kevlar/Steel Shell
  • 10 Gauge
  • Dark Blue Latex MicroFinish Grip
  • Palm & Fingertips
  • Knit Wrist
  • EN 5 / ANSI A4
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3544D

EN 388 2016 Results: 3544DX

Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

en-407
Protective Gloves Against Thermal Hazards: X2XXXX

Resistance to Flammability - X
Contact Heat Resistance - 2
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Kevlar Liner

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove with Split Cowhide Leather Palm and Kevlar® Stitching - Knit Wrist

09-K300LP

  • Split Cowhide Leather Palm
  • 7G Seamless Knit Cut Liner
  • 100% Kevlar®
  • Reinforced Thumb Crotch
  • Kevlar® Stitching
  • Knit Wrist
  • SIZES: S-XL
  • PACKED: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4443D

EN 388 2016 Results: 4443DX

Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Kevlar Liner

Kut Gard®

Top Grain Goatskin Leather Drivers Glove with Kevlar® Lining - Straight Thumb

09-K3700

  • Goatskin Leather Drivers
  • Tan Premium Grade
  • 13G Kevlar® Cut Liner
  • Straight Thumb
  • Kevlar® Stitching
  • Silicone Free
  • Slip-On Cuff
  • SIZES: S-3XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X32B

EN 388 2016 Results: 3X32BX

Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-150

  • PolyKor Blend Seamless Knit
  • 13 Gauge
  • Salt & Pepper
  • Gray Polyurethane Coated Smooth Grip
  • Palm & Fingertips
  • Knit Wrist
  • Silicone Free
  • SIZES: XXS-3XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42B

EN 388 2016 Results: 4X42BX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI PUNCTURE LEVEL: 4

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-330

  • Seamless Knit Shell
  • 13 Gauge
  • Blue & White
  • Double Dipped
  • Black Nitrile Microsurface Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4342B

EN 388 2016 Results: 4342BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nitrile Foam Grip

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

16-334

  • Seamless Knit Shell
  • 13 Gauge
  • Salt & Pepper
  • Black Nitrile Foam Grip
  • Palm and Fingertips
  • Knit Wrist
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4343B

EN 388 2016 Results: 4343BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-350

  • PolyKor Blend Seamless Knit
  • 13 Gauge
  • Salt & Pepper
  • Black Nitrile Microsurface Coated Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43D

EN 388 2016 Results: 4X43DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
PVC Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with PVC Coated Smooth Grip on Palm & Fingers

16-747

  • PolyKor Blend Seamless Knit Shell
  • 13 Gauge
  • Black
  • Black PVC Coated Grip
  • Palm & Fingertips
  • Knit Wrist
  • Unbranded
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3341C

EN 388 2016 Results: 3341CX

Abrasion: 3
Cut (Coupe Test): 3
Tear: 4
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Latex Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Double-Dipped Latex Coated MicroSurface Grip on Palm & Fingers

16-815

  • PolyKor Blend Seamless Knit
  • 13 Gauge
  • Salt & Pepper
  • Double Dipped
  • Black MicroSurface Latex Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3543C

EN 388 2016 Results: 3543CX

Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Full Hand

16-CUT229MS-MX

  • PolyKor Blend Seamless Knit
  • 13 Gauge
  • Blue/Black
  • Double Dipped
  • Blue Nitrile w/ Black MicroSurface Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: S-XL
  • PACKED: 10 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542B

EN 388 2016 Results: 4542BX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
ECO Series CR Sustainable Fiber Gloves BEST SELLER

Great White® ECO Series™

Seamless Knit Dyneema® Diamond 2.0 Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D322

  • Great White Eco
  • White Dyneema Diamond Blended Shell
  • 13 Gauge
  • Gray Polyurethane Coated Smooth Grip
  • Palm & Fingertips
  • Knit Wrist
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI PUNCTURE LEVEL: 3

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Beginning of Life – Made from Bio-Based Materials

PIP® has collaborated with global partners like Dyneema® to develop bio-based ultra-high molecular weight polyethylene fiber delivers the same performance as conventional HPPE fibers, but with a lower carbon footprint. This innovative technique utilizes the mass balance approach and further reduces our reliance on fossil fuel-based resources.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Hi-Performance Nitrile by ATG BEST SELLER

MaxiFlex® Cut™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm & Fingers - Micro Dot Palm - Touchscreen Compatible

34-8443

  • MaxiFlex Cut by ATG
  • Premium Black Micro-Foam Nitrile Dotted Palm
  • Green Engineered Yarn Shell
  • Reinforced Thumb Crotch
  • ANSI A2 EN 3
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4331B

EN 388 2016 Results: 4331BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Hi-Performance Nitrile by ATG

MaxiFlex® Cut™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles - Micro Dot Palm

34-8453

  • MaxiFlex Cut by ATG
  • Premium Black Micro-Foam Nitrile dotted palm
  • Green Engineered Yarn Shell
  • Reinforced Thumb Crotch
  • EN Cut Level 3
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4331B

EN 388 2016 Results: 4331BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Hi-Performance Nitrile by ATG BEST SELLER

MaxiFlex® Cut™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm & Fingers - Touchscreen Compatible

34-8743

  • MaxiFlex Cut by ATG
  • Green 15G Engineered Yarn Shell
  • Premium Black MicroFoam Nitrile Coated
  • Palm & Fingertips
  • Reinforced Thumb Crotch
  • SIZES: XS-3XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4331B

EN 388 2016 Results: 4331BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Hi-Performance Nitrile by ATG

MaxiFlex® Cut™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles

34-8753

  • MaxiFlex Cut by ATG
  • Premium Black Micro-Foam Nitrile coated palm
  • Green Engineered Yarn Shell
  • Reinforced Thumb Crotch
  • EN Cut Level 3
  • SIZES: XS-3XL
  • PACKED: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4331B

EN 388 2016 Results: 4331BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Hi-Performance Nitrile by ATG

MaxiCut® Ultra DT™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm & Fingers - Micro Dot Palm

44-3445

  • MaxiCut Ultra by ATG
  • Premium Black Dotted Nitrile MicroFoam Grip
  • Engineered Yarn Shell
  • Reinforced Thumb Crotch
  • EN Cut Level 5
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542C

EN 388 2016 Results: 4542CX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Hi-Performance Nitrile by ATG

MaxiCut® Ultra DT™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles - Micro Dot Palm

44-3455

  • MaxiCut Ultra by ATG
  • Premium Black Dotted Nitrile MicroFoam Grip
  • Engineered Yarn Shell
  • Reinforced Thumb Crotch
  • EN Cut Level 5
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542C

EN 388 2016 Results: 4542CX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Hi-Performance Nitrile by ATG BEST SELLER

MaxiCut® Ultra™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm & Fingers - Touchscreen Compatible

44-3745

  • MaxiCut Ultra by ATG
  • Premium Black Nitrile MicroFoam Grip
  • Blue Engineered Yarn Shell
  • Silicone Free
  • ANSI A3 EN 5
  • SIZES: XS-3XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4442C

EN 388 2016 Results: 4442CX

Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Hi-Performance Nitrile by ATG

MaxiCut® Ultra™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles

44-3755

  • MaxiCut Ultra by ATG
  • Premium Black Nitrile MicroFoam Grip Reinforced Thumb Crotch
  • EN Cut Level 5
  • Silicone Free
  • SIZES: XS-3XL
  • PACKED: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542C

EN 388 2016 Results: 4542CX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
SHOWING 1-34 OF 34 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL