The Assurance You Need

Our Assurance®, Ambidex® and ProCoat® lines of chemical and liquid resistant gloves have been designed with the utmost safety in mind. Resistance and permeation test results are available for a wide variety of chemical families found commonly in the workplace. While these results are generated in a laboratory setting and we are highly confident of the ability to perform well at work, we recommend that you should also conduct your own testing to make certain that the gloves are compatible with your application.

SHOWING 1-11 OF 11 ITEMS
1 of 1
Unlined Canners

Assurance®

Unsupported Latex Canner, Unlined with Raised Diamond Grip -18 Mil

47-L171B

  • Assurance Unsupported Latex
  • 18 Mil
  • Overall Length 12 Inches
  • Blue
  • Unlined
  • Diamond Grip
  • Straight Cuff
  • SIZES: S-XL
  • PACKED: 12 Dozen/Case

ABK

EN 374 Results: ABK

A: Methanol
B: Acetone
K: Sodium Hydroxide 40%


To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

1010

EN 388 2016 Results: 1010X

Abrasion: 1
Cut (Coupe Test): 0
Tear: 1
Puncture: 0
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Standard Weight Nitrile

ArmorTuff®

Nitrile Dipped Glove with Jersey Liner and Smooth Finish on Full Hand - Knit Wrist

56-3152

  • Cotton Jersey Liner
  • Full Dip Blue Nitrile Coating
  • Smooth Grip
  • Sanitized® Treated
  • Knit Wrist
  • SIZES: S-XL
  • PACKED: 6 Dozen/Case

4211

EN 388 2016 Results: 4211X

Abrasion: 4
Cut (Coupe Test): 2
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Thinly Coated Nitrile

ArmorLite®

Nitrile Dipped Glove with Interlock Liner and Textured Finish on Palm, Fingers & Knuckles - Knit Wrist

56-3170

  • Cotton Interlock Liner
  • 3/4 Dip Blue Nitrile Coating
  • Textured Grip
  • ActiFresh™ Treated
  • Knit Wrist
  • SIZES: XS-XL
  • PACKED: 6 Dozen/Case

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Compare
Hi-Performance Nitrile by ATG

MaxiDry® Plus™

Nitrile Coated Glove with Nylon / Elastane Liner and Non-Slip Grip on Palm & Fingers

56-530

  • MaxiDry Plus by ATG
  • Nitrile Coated Nylon Liner with Elastane
  • Liquid-Proof
  • Blue/Black
  • Non-Slip Grip
  • 12in Gauntlet Cuff
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case

JKL

EN 374 Results: JKL

J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%


To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Multi-Polymer Blends

MaxiChem® Cut™

Nitrile Blend Coated Glove with HPPE Liner and Non-Slip Grip on Palm & Fingers - 12" - DISCONTINUED

56-633

  • MaxiChem Cut by ATG
  • Nitrile Blend
  • HPPE Liner
  • Green/Black
  • Liquid Proof
  • Non-Slip Grip
  • 12-inch Gauntlet Cuff
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case

AKL

EN 374 Results: AKL

A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%


To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4342B

EN 388 2016 Results: 4342BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Coated with MicroFinish Grip

ActivGrip™

Nitrile Coated Glove with Cotton Liner and MicroFinish Grip - 12"

56-AG586

  • Nitrile with MicroFinish Grip
  • Gray
  • 15 gauge poly/cotton liner
  • 12 Length
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare

ChemGrip™

Neoprene Coated Glove with Interlock Liner and Smooth Finish - 31"

57-8675

  • Supported Neoprene Glove
  • 31 Inch Length
  • Interlock Lined
  • Black
  • Smooth Finish
  • Gauntlet Cuff
  • SIZE: L
  • PACKED: 12 Pair/Case

AJKL

EN 374 Results: AJKL

A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%


To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3121

EN 388 2016 Results: 3121X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Specialty PVC Blends on Seamless Liners

XtraTuff™

Oil Resistant PVC Glove with Kevlar® Liner and Rough Grip

58-8658K

  • XtraTuff
  • Oil Resistant
  • Rough Coated
  • Blue PVC
  • 13 Gauge Seamless Kevlar Liner
  • SIZES: M-XL
  • PACKED: 6 Dozen/Case

AJK

EN 374 Results: AJK

A: Methanol
J: Heptane
K: Sodium Hydroxide 40%


To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42C

EN 388 2016 Results: 4X42C

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare

Assurance®

Heavy Duty Unsupported Latex, Unlined with Smooth Finish - 44 Mil

BLIN-MX

  • Assurance Unsupported Latex
  • 44 Mil
  • Overall Length 17 Inches
  • Black
  • Unlined
  • Smooth Finish
  • Rolled Cuff
  • SIZES: M-XL
  • PACKED: 1 Dozen/Case

4011

EN 388 2016 Results: 4011XX

Abrasion: 4
Cut (Coupe Test): 0
Tear: 1
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare

ArmorTuff®

Nitrile Dipped Glove with Jersey Liner and Smooth Finish on Full Hand - Plasticized Safety Cuff

GT-9912-JB

  • ArmorTuff
  • Blue
  • Nitrile Full Coating
  • Jersey Liner
  • 3-inch Plasticized Safety Cuff
  • SIZES: M-XL
  • PACKED: 6 Dozen/Case

4211

EN 388 2016 Results: 4211XX

Abrasion: 4
Cut (Coupe Test): 2
Tear: 1
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare

Assurance®

Unsupported Nitrile, Unlined with Raised Diamond Grip - 11 Mil

NIT-MX

  • Assurance Unsupported Nitrile
  • 11 Mil
  • Overall Length 13 Inches
  • Green
  • Unlined
  • Raised Diamond Grip
  • Straight Cuff
  • SIZES: S-2XL
  • PACKED: 12 Dozen/Case

3001

EN 388 2016 Results: 3001XX

Abrasion: 3
Cut (Coupe Test): 0
Tear: 0
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
SHOWING 1-11 OF 11 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL