LOGIN/ SIGN UP Products Brands Industries Resources About Us Value Proposition
Products Category
Arm Protection Controlled Environment Electrical Safety Ergonomics Eye Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection
Arm ProtectionCut Resistant Sleeve
Controlled EnvironmentCE Finger CotsCE GlovesCE Supplies
Electrical SafetyArc Protection KitsInsulating Glove KitInsulating Gloves
ErgonomicsKnee Protection
Eye ProtectionEyewear AccessoriesSafety Glasses
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesProtection From ColdProtection From Heat
Head ProtectionBump Caps
Hearing ProtectionEar MuffsEar Plugs
Heat StressHydration
Protective ClothingDisposable ClothingHi-Vis ApparelRainwear
Respiratory ProtectionCartridgesDisposable MasksReusable Facepieces
Warning BeaconsE-Flare Beacon
Welding ProtectionHand Protection
promo-tile

HALF MASK RESPIRATORSREVOLUTIONARY FORCE TYPHOON™8

promo-tile

G-Tek® COATED SEAMLESS KNITS CONFIDENCE TO DO THE JOB™

promo-tile

BioSoft™THE WORLD’S FIRST SUSTAINABLE BIO-BASED EAR PLUGS

Global Leader in Hand Protection

As a licensee of both Dyneema® and DuPont® advanced fibers, our gloves and sleeves are made using proprietary engineered yarn blends and coatings. The result - hand and arm protection that is innovative and performance driven. Meeting todays tough ANSI and EN standards, we develop and market seamless knit, coated and uncoated, polymer, supported and unsupported as well as cut and sewn gloves in both leather and advanced composite materials.

Hand Protection (141)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Nitrile Coated Smooth Grip on Palm & Fingers - Medium Weight

09-K1400

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: Korea, Republic of
  • Sizes: XS-XL
  • Packed: 6 Dozen/Case
A23X
A23X

Cut Level: A2
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

2342BX
EN 388 2016 Results: 2342BX
Abrasion: 2
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Canvas Hot Mill Gloves

PIP®

Economy Grade Hot Mill Glove with Two-Layers of Cotton Canvas - 24 oz

94-924I

  • Liner Material: Canvas/ Cotton
  • Weight: 24oz
  • Cuff: Band Top
  • Construction: Cut-and-Sewn, Clute Cut, Multi-Layer
  • Size: MENS
  • Packed: 10 Dozen/Case

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

09-K1618

  • Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A33X
A33X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

4421CX
EN 388 2016 Results: 4421CX
Abrasion: 4
Cut (Coupe Test): 4
Tear: 2
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Canvas Hot Mill Gloves

PIP®

Premium Grade Hot Mill Glove with Three-Layers of Cotton Canvas and Burlap Liner - 28 oz

94-928G

  • Liner Material: Canvas/ Cotton
  • Lining: Burlap
  • Weight: 28oz
  • Cuff: Gauntlet
  • Construction: Cut-and-Sewn, Starched Cuff, Clute Cut, Multi-Layer
  • Size: MENS
  • Packed: 10 Dozen/Case
 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

PowerGrab™ Katana

Seamless Knit DuPont™ Kevlar® / Steel Glove with Latex Coated MicroFinish Grip on Palm & Fingers

09-K1700

  • Cut Level: A6
  • Liner Material: Kevlar
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A63X
A63X

Cut Level: A6
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

3X43FX
EN 388 2016 Results: 3X43FX
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X2XXXX
Protective Gloves Against Thermal Hazards: X2XXXX
Resistance to Flammability - X
Contact Heat Resistance - 2
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Double-Dipped Latex Coated MicroSurface Grip on Palm & Fingers

16-815

  • Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A334
A334

Cut Level: A3
Test Method: ASTM F2992-15

Puncture Level: 4
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3543CX
EN 388 2016 Results: 3543CX
Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Top Grain Cowhide

PIP®

Industry Grade Top Grain Cowhide Leather Drivers Glove - Straight Thumb

68-106

  • Hide: Top Grain Cowhide
  • Grade: Industry
  • Thumb: Straight
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 10 Dozen/Case
Top Grain Pigskin

PIP®

Top Grain Pigskin Leather Palm Glove with Fabric Back - Rubberized Safety Cuff

87-3563

  • Grade: Economy
  • Hide: Top Grain Pigskin
  • Palm: Single
  • Cuff: Safety
  • Back: Fabric
  • Thumb: Wing
  • Stitching: Nylon
  • Construction: Rubberized Cuff, Gunn Cut
  • Sizes: L-XL
  • Packed: 10 Dozen/Case

PIP®

Economy Grade Split Cowhide Leather Patch Palm Glove with Denim Back - Denim Safety Cuff

85-DB7563P

  • Grade: Economy
  • Hide: Split Cowhide
  • Palm: Reinforced
  • Cuff: Safety
  • Back: Canvas
  • Thumb: Wing
  • Stitching: Nylon
  • Construction: Denim Cuff, Gunn Cut
  • Sizes: Men's
  • Packed: 10 Dozen/Case
Top Grain Cowhide

PIP®

Industry Grade Top Grain Leather Drivers Glove with Split Cowhide Back - Keystone Thumb

68-160SB

  • Hide: Top Grain Cowhide
  • Grade: Industry
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 10 Dozen/Case

PIP®

Economy Grade Top Grain Pigskin Leather Drivers Glove - Straight Thumb

70-301

  • Hide: Top Grain Pigskin
  • Grade: Economy
  • Thumb: Straight
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 10 Dozen/Case

Maximum Safety®

AR/FR Seamless Knit Aramid Glove with Nitrile Coated Smooth Grip on Palm & Fingers

73-K1800

  • ARC Rating: 7.4 cal/cm2
  • Liner Material: Aramid
  • Grip: Smooth
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ATPV 7.4 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

2542CX
EN 388 2016 Results: 2542CX
Abrasion: 2
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

MaxiChem® Cut™

Nitrile Blend Coated Glove with HPPE Liner and Non-Slip Grip on Palm & Fingers - 12" - DISCONTINUED

56-633

  • Polymer: Nitrile
  • Lining: Engineered Yarn
  • Length: 12"
  • Cuff: Gauntlet
  • Grip: Non-Slip
  • Coating Coverage: Palm, Fingers & Knuckles
  • Construction: Supported
  • Sizes: S-XXL
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4342BX
EN 388 2016 Results: 4342BX
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

AKL
EN 374 Results: AKL
Type: B
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

PIP®

Economy Top Grain Pigskin Leather Palm Glove with Fabric Back - Rubberized Safety Cuff

87-3501

  • Grade: Premium
  • Hide: Top Grain Pigskin
  • Palm: Single
  • Cuff: Safety
  • Back: Canvas
  • Thumb: Wing
  • Stitching: Nylon
  • Construction: Gunn Cut
  • Sizes: L
  • Packed: 10 Dozen/Case

ChemGrip™

Neoprene Coated Glove with Interlock Liner and Smooth Finish - 31"

57-8675

  • Polymer: Neoprene
  • Lining: Interlock
  • Length: 31"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Multi
  • Liner Material: Interlock
  • Construction: Supported
  • Sizes: L
  • Packed: 12 Pair/Case
3121X
EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

AJKL
EN 374 Results: AJKL
Type: B
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

PIP®

Regular Grade Split Cowhide Leather Welder's Glove with Cotton Lining

73-888

  • Liner Material: Cotton
  • Lining: Cotton
  • Cuff: Gauntlet
  • Length: 14"
  • Construction: Cut-and-Sewn
  • Sizes: L
  • Packed: 6 Dozen/Case

PIP®

Regular Top Grain Pigskin Leather TIG/MIG Welder's Glove with Kevlar® Stitching - 4" Gauntlet Cuff

75-320

  • Lining: Unlined
  • Cuff: Gauntlet
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 6 Dozen/Case

Assurance® Guardian™

14" Long 7 Mil Butyl Rubber Glove with Smooth Grip

1UB0007

  • Polymer: Butyl
  • Thickness: 7 Mil
  • Length: 14"
  • Cuff: Straight
  • Grip: Smooth
  • Coating Coverage: Full Hand
  • Construction: Unsupported
  • Sizes: XS-XL
  • Packed: 72 Pair/Case

PIP®

Standard Grade Split Cowhide Leather Double Palm Glove with Fabric Back - Rubberized Safety Cuff

84-7533

  • Grade: Regular
  • Hide: Split Cowhide
  • Palm: Double
  • Cuff: Safety
  • Back: Canvas
  • Thumb: Wing
  • Stitching: Nylon
  • Construction: Rubberized Cuff, Gunn Cut
  • Sizes: L
  • Packed: 6 Dozen/Case

Kut Gard®

DuPont™ Kevlar® / Preox Seamless Knit Hot Mill Glove with Terry Cotton Liner and Double-Sided SilaGrip™ Coating - 32 oz

43-851

  • Liner Material: Kevlar/ Preox
  • Lining: Cotton Terry
  • Weight: 32oz
  • Coating: Silicone
  • Coating Coverage: Double-Sided
  • Grip: Pattern
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: L
  • Packed: 24/Case
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Ambi-dex®

Food Grade Disposable Latex Glove, Powder Free - 5 mil

62-323PF

  • Grade: Food
  • Polymer: Latex
  • Thickness: 5 Mil
  • Grip: Textured
  • Powder: Powder Free
  • Box Count: 100
  • Sizes: S-XL
  • Packed: 10 Boxes/Case

Maximum Safety®

Goatskin Leather Palm with Fabric Back and 3M Thinsulate® Lining - Waterproof Barrier - DISCONTINUED

120-4800

  • Hide: Top Grain Goatskin
  • Grade: Premium
  • Lining: 3M Thinsulate
  • Coating: PVC
  • Grip: Raised Diamond
  • Palm: Leather
  • Cuff: Knit Wrist
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 72 Pair/Case

PIP®

Economy Grade Split Cowhide Leather Welder's Glove with Cotton Liner

73-888A

  • Lining: Cotton
  • Cuff: Gauntlet
  • Length: 14"
  • Construction: Cut-and-Sewn
  • Sizes: L
  • Packed: 6 Dozen/Case

PIP®

Regular Grade Split Cowhide Leather Welder's Glove with Cotton Lining

73-7088

  • Liner Material: Cotton
  • Lining: Cotton
  • Cuff: Gauntlet
  • Length: 14"
  • Construction: Cut-and-Sewn
  • Sizes: L
  • Packed: 6 Dozen/Case

Maximum Safety®

Professional Mechanic's Glove with Synthetic Leather Palm and Fabric Back - Black

120-MX2805

  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn
  • Sizes: S - XXL

Ambi-Thix™

Medical Grade Disposable Latex Exam Glove, Powder Free with Fully Textured Grip - 13 Mil

62-327PF

  • Grade: Medical
  • Polymer: Latex
  • Thickness: 13 Mil
  • Box Count: 50
  • Sizes: S - XL

G-Tek®

18 Gauge Seamless Knit full coated Nitrile glove with additional second sandy microsurface nitrile coating to the palm & fingers.

34-282-EN

  • Liner Material: Nylon/ Spandex
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Full Hand
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Coated Seamless Knit, Double Dipped Coating, Oil Resistant, Touchscreen Compatible, Waterproof
4121X
EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X1XXXX
Protective Gloves Against Thermal Hazards: X1XXXX
Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

ArmorTuff®

Nitrile Dipped Glove with Jersey Liner and Smooth Finish on Full Hand - Plasticized Safety Cuff

GT-9912-JB

  • Thickness:
  • Length:
  • Cuff: Safety
  • Grip: Smooth
  • Coating Coverage: Full Hand
  • Liner Material: Jersey
  • Construction: Cut-and-Sewn, Plasticized Cuff, Fabric Dipped
  • Sizes: M-XL
  • Packed: 6 Dozen/Case
4211XX
EN 388 2016 Results: 4211XX
Abrasion: 4
Cut (Coupe Test): 2
Tear: 1
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

G-Tek® KEV™

Hi-Vis Seamless Knit DuPont™ Kevlar® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

09-K1640

  • Cut Level: A4
  • Liner Material: Kevlar
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A43X
A43X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4X31DX
EN 388 2016 Results: 4X31DX
Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Maximum Safety®

Brickyard™ Workman's Glove with Synthetic Leather Palm and TPR Impact Back - Silicone Palm Grip

120-4900

  • Impact Protection: Finger/ Back of Hand
  • Coating: Silicone
  • Coating Coverage: Palm & Fingers
  • Grip: Pattern
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
3131X
EN 388 2016 Results: 3131X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Maximum Safety®

Professional Mechanic's Gloves

120-MX2840

  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 72 Pair/Case

PIP®

Regular Grade Top Grain Leather Drivers Glove with Split Cowhide Back and DuPont™ Kevlar® Stitching - Wing Thumb

68-162SB

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Wing
  • Cuff: Slip-on
  • Stitching: Kevlar
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 10 Dozen/Case

PIP®

Regular Grade Split Cowhide Leather Drivers Glove - Straight Thumb

69-138

  • Hide: Split Cowhide
  • Grade: Regular
  • Thumb: Straight
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 10 Dozen/Case

PIP®

G-Tek Touch Screen Wet Work Gloves

34-282

  • Sizes: 7-12
SHOWING 109-141 OF 141 ITEMS
4 of 4
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL