LOGIN/ SIGN UP Products Brands Industries Resources About Us Value Proposition
Products Category
Arm Protection Controlled Environment Electrical Safety Ergonomics Eye Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection
Arm ProtectionCut Resistant Sleeve
Controlled EnvironmentCE Finger CotsCE Gloves
Electrical SafetyArc Protection KitsInsulating Glove KitInsulating Gloves
ErgonomicsKnee Protection
Eye ProtectionEyewear AccessoriesSafety Glasses
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesProtection From ColdProtection From Heat
Head ProtectionBump Caps
Hearing ProtectionEar MuffsEar Plugs
Heat StressHydration
Protective ClothingDisposable ClothingHi-Vis ApparelRainwear
Respiratory ProtectionCartridgesDisposable MasksRespiratory AccessReusable Facepieces
Warning BeaconsE-Flare Beacon
Welding ProtectionHand Protection
promo-tile

HALF MASK RESPIRATORSREVOLUTIONARY FORCE TYPHOON™8

promo-tile

G-Tek® COATED SEAMLESS KNITS CONFIDENCE TO DO THE JOB™

promo-tile

BioSoft™THE WORLD’S FIRST SUSTAINABLE BIO-BASED EAR PLUGS

Leaders in
Hand Protection
and PPE

BROWSE ALL PRODUCTS

Hand Protection (134)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
Hi-Performance Nitrile by ATG

MaxiFlex® Cut™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles - Micro Dot Palm

34-8453

  • Cut Level: A2
  • Liner Material: Engineered Yarn
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm, Fingers & Knuckles
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Country of Origin: Sri Lanka
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
A242
A242

Cut Level: A2
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4331BX
EN 388 2016 Results: 4331BX
Abrasion: 4
Cut (Coupe Test): 3
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

09-K1218

  • Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 18
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A332
A332

Cut Level: A3
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

4X31CX
EN 388 2016 Results: 4X31CX
Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X1XXXX
Protective Gloves Against Thermal Hazards: X1XXXX
Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

ATA Hide-Away

Kut Gard®

Seamless Knit ATA® Hide-Away™ / Aramid Blended Glove with Cotton/Polyester Plating - Heavy Weight

MATA500HA

  • Cut Level: A6
  • Liner Material: Aramid/ Stainless Steel Wire/ Cotton
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
A63X
A63X

Cut Level: A6
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Unsupported Neoprene Over Latex

Assurance®

Unsupported Neoprene/Latex, Flock Lined with Honeycomb Grip - 28 Mil

52-3671

  • Polymer: Neoprene over Latex
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case
2110XX
EN 388 2016 Results: 2110XX
Abrasion: 2
Cut (Coupe Test): 1
Tear: 1
Puncture: 0
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Terry Cloth Gloves

Kut Gard®

DuPont™ Kevlar® / Preox Seamless Knit Hot Mill Glove with Cotton Liner - 32 oz

43-850

  • Liner Material: Kevlar/ Preox
  • Lining: Cotton Terry
  • Weight: 32oz
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Size: L
  • Packed: 24/Case
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Top Grain Goatskin

PIP®

Industry Grade Top Grain Goatskin Leather Drivers Glove - Keystone Thumb

71-3600

  • Hide: Top Grain Goatskin
  • Grade: Industry
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 10 Dozen/Case
PVC Coated Cotton/Poly Knit Gloves

PIP®

Regular Weight Seamless Knit Cotton/Polyester Glove with PVC Dotted Grip - Double-Sided

36-110PDD

  • Liner Material: Cotton/ Polyester
  • Gauge: 7
  • Coating: PVC
  • Coating Coverage: Double-Sided
  • Grip: Dot
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XL
  • Packed: 20 Dozen/Case
Top Grain Cowhide

PIP®

Regular Grade Top Grain Cowhide Leather Drivers Glove - Straight Thumb

68-103

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Straight
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 10 Dozen/Case
Kevlar Gloves with PVC Grips

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove with PVC Dot Grip - Light Weight

08-K200PD

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 13
  • Weight: Lightweight
  • Coating: PVC
  • Coating Coverage: One Side
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Cotton/Polyester Blend

PIP®

Economy Weight Seamless Knit Cotton/Polyester Glove - Natural

35-C103

  • Liner Material: Cotton/ Polyester
  • Gauge: 7
  • Weight: Economy Weight
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-L
  • Packed: 25 Dozen/Case
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove - Heavy Weight

07-K350

  • Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-XL
  • Packed: 6 Dozen/Case
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

MaxiFlex Nylon, Micro-Foam Nitrile

MaxiFlex® Endurance™

Seamless Knit Nylon Glove with Nitrile Coated MicroFoam Grip on Full Glove - Micro Dot Palm - Touchscreen

34-8745

  • Liner Material: Nylon/ Spandex
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Full Hand
  • Grip: Dot
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case
A122
A122

Cut Level: A1
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 2
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A1
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4131X
EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Leather Drivers

Boss®

Top Grain Leather Drivers Glove with Split Cowhide Back, Kevlar® Stitching and Hi-Vis Impact TPR - Cotton Liner

997KBC

  • Hide: Top Grain Cowhide
  • Liner Material: Cotton
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
XX3
XX3

Puncture Level: 3
Test Method: ASTM F1342

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2132XP
EN 388 2016 Results: 2132XP
Abrasion: 2
Cut (Coupe Test): 1
Tear: 3
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Top Grain Cowhide

PIP®

Economy Grade Top Grain Cowhide Leather Drivers Glove - Straight Thumb

68-105

  • Hide: Top Grain Cowhide
  • Grade: Economy
  • Thumb: Straight
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 10 Dozen/Case
Latex Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Latex Coated Crinkle Grip on Palm & Fingers

16-813

  • Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
A244
A244

Cut Level: A2
Test Method: ASTM F2992-15

Puncture Level: 4
Test Method: ASTM F1342

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3343B
EN 388 2016 Results: 3343B
Abrasion: 3
Cut (Coupe Test): 3
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

MaxiDry Lightweight Nitrile Grip

MaxiDry®

Lightweight Nitrile Glove with Seamless Knit Nylon Liner and Non-Slip MicroFoam Grip on Palm & Fingers - Palm Coated Knit Wrist

56-424

  • Liner Material: Nylon/ Elastane
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroFoam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
X32
X32

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4121X
EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Latex Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor®/Aramid Blended Glove with Latex Coated Crinkle Grip on Palm & Fingers

09-K1320

  • Cut Level: A3
  • Liner Material: PolyKor/ Aramid
  • Gauge: 10
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
A334
A334

Cut Level: A3
Test Method: ASTM F2992-15

Puncture Level: 4
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X43C
EN 388 2016 Results: 3X43C
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Split Cowhide

Kut Gard®

Seamless Knit Kevlar® Glove with Split Cowhide Leather Palm and Kevlar® Stitching - Knit Wrist

09-K300LP

  • Hide: Split Cowhide
  • Palm: Leather
  • Cuff: Knit Wrist
  • Stitching: Kevlar
  • Construction: Seamless Knit, Reinforced Thumb Crotch
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
A4X4
A4X4

Cut Level: A4
Test Method: ASTM F2992-15

Puncture Level: 4
Test Method: ASTM F1342

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4443D
EN 388 2016 Results: 4443D
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-330

  • Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
A243
A243

Cut Level: A2
Test Method: ASTM F2992-15

Puncture Level: 3
Test Method: ASTM F1342

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4342BX
EN 388 2016 Results: 4342BX
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Cut Protection in Oily Environments

MaxiCut® Oil

Seamless Knit Engineered Yarn Glove with Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles

44-305

  • Cut Level: A2
  • Liner Material: Engineered Yarn
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm, Fingers & Knuckles
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Country of Origin: Sri Lanka
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
A242
A242

Cut Level: A2
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4341BX
EN 388 2016 Results: 4341BX
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Top Grain Cowhide

PIP®

Regular Grade Top Grain Leather Drivers Glove with Split Cowhide Back - Keystone Thumb

68-161SB

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 10 Dozen/Case
MaxiFlex Active-Ultralight Foam Nitrile

MaxiFlex® Active

Seamless Knit Nylon Glove with Ultra Lightweight Nitrile Coated MicroFoam Grip on Palm & Fingers - Touchscreen

34-824

  • Liner Material: Nylon/ Spandex
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroFoam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-XL
  • Packed: 12 Dozen/Case
X32
X32

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4131X
EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Top Grain Goatskin

PIP®

Regular Grade Top Grain Goatskin Leather Drivers Glove - Keystone Thumb

71-3601

  • Hide: Top Grain Goatskin
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 10 Dozen/Case

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Nitrile Coated Smooth Grip on Palm & Fingers - Medium Weight

09-K1400

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: Korea, Republic of
  • Sizes: XS-XL
  • Packed: 6 Dozen/Case
A23X
A23X

Cut Level: A2
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

2342BX
EN 388 2016 Results: 2342BX
Abrasion: 2
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Kevlar with MicroFinish Latex Grip

PowerGrab™ KEV4

Seamless Knit DuPont™ Kevlar® Glove with Latex Coated MicroFinish Grip on Palm & Fingers

09-K1444

  • Cut Level: A4
  • Liner Material: Kevlar
  • Gauge: 10
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A434
A434

Cut Level: A4
Test Method: ASTM F2992-15

Puncture Level: 4
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X43D
EN 388 2016 Results: 3X43D
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X2XXXX
Protective Gloves Against Thermal Hazards: X2XXXX
Resistance to Flammability - X
Contact Heat Resistance - 2
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove - Light Weight

07-K200

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 1
Test Method: ASTM F1060-18
Temperature: 176°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Top Grain Cowhide

PIP®

Regular Grade Top Grain Leather Drivers Glove with Split Cowhide Back and Kevlar® Stitching - Keystone Thumb

68-163SB

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Kevlar
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 10 Dozen/Case
Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers - 18 Gauge - Touchscreen

34-400

  • Liner Material: Nylon
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case
X32
X32

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4111X
EN 388 2016 Results: 4111X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Polyurethane Grip w/ PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Vend-Ready

16-150V

  • Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XXS-3XL
  • Packed: 72 Pair/Case
A244
A244

Cut Level: A2
Test Method: ASTM F2992-15

Puncture Level: 4
Test Method: ASTM F1342

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42BX
EN 388 2016 Results: 4X42BX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Mechanics Gloves

Ironcat®

Heavy Duty Top Grain Deerskin Leather Palm Glove with Spandex Back

86400

  • Hide: Top Grain Deerskin
  • Grade: Regular
  • Thumb: Wing
  • Palm: Leather
  • Stitching: Standard
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn
  • Sizes: M-2XL
  • Packed: 72 Pair/Case
Standard Weight Nitrile

ArmorTuff®

Nitrile Dipped Glove with Jersey Liner and Smooth Finish on Palm, Fingers & Knuckles - Knit Wrist

56-3151

  • Polymer: Nitrile
  • Lining: Jersey
  • Cuff: Knit Wrist
  • Grip: Smooth
  • Coating Coverage: Palm, Fingers & Knuckles
  • Liner Material: Cotton
  • Construction: Cut-and-Sewn, Fabric Dipped
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
4121
EN 388 2016 Results: 4121
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Nitrile Coated with MicroFinish Grip

ActivGrip™

Nitrile Coated Glove with Cotton Liner and MicroFinish Grip - 12"

56-AG586

  • Polymer: Nitrile
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: MicroFinish
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
4121X
EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

09-K1618

  • Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A33X
A33X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

4421CX
EN 388 2016 Results: 4421CX
Abrasion: 4
Cut (Coupe Test): 4
Tear: 2
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Split Cowhide

PIP®

Premium Grade Split Cowhide Leather Drivers Glove - Keystone Thumb

69-189

  • Hide: Split Cowhide
  • Grade: Premium
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 10 Dozen/Case

PowerGrab™ Katana

Seamless Knit DuPont™ Kevlar® / Steel Glove with Latex Coated MicroFinish Grip on Palm & Fingers

09-K1700

  • Cut Level: A6
  • Liner Material: Kevlar
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A63X
A63X

Cut Level: A6
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

3X43FX
EN 388 2016 Results: 3X43FX
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X2XXXX
Protective Gloves Against Thermal Hazards: X2XXXX
Resistance to Flammability - X
Contact Heat Resistance - 2
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Double-Dipped Latex Coated MicroSurface Grip on Palm & Fingers

16-815

  • Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
A334
A334

Cut Level: A3
Test Method: ASTM F2992-15

Puncture Level: 4
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3543CX
EN 388 2016 Results: 3543CX
Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

SHOWING 73-108 OF 134 ITEMS
3 of 4
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL